Erasure of Data stored in Random-Access Memory
Simply repeatedly overwriting the data held in DRAM with new data isn't nearly as effective as it is for magnetic media. The new data will begin stressing or relaxing the oxide as soon as it is written, and the oxide will immediately begin to take a "set" which will either reinforce the previous "set" or will weaken it. The greater the amount of time that new data has existed in the cell, the more the old stress is "diluted", and the less reliable the information extraction will be. Generally, the rates of change due to stress and relaxation are in the same order of magnitude. Thus, a few microseconds of storing the opposite data to the currently stored value will have little effect on the oxide. Ideally, the oxide should be exposed to as much stress at the highest feasible temperature and for as long as possible to get the greatest "erasure" of the data. Unfortunately if carried too far this has a rather detrimental effect on the life expectancy of the RAM.
Therefore the goal to aim for when sanitising memory is to store the data for as long as possible rather than trying to change it as often as possible. Conversely, storing the data for as short a time as possible will reduce the chances of it being "remembered" by the cell. Based on tests on DRAM cells, a storage time of one second causes such a small change in threshold that it probably isn't detectable. On the other hand, one minute is probably detectable, and 10 minutes is certainly detectable.
The most practical solution to the problem of DRAM data retention is therefore to constantly flip the bits in memory to ensure that a memory cell never holds a charge long enough for it to be "remembered". While not practical for general use, it is possible to do this for small amounts of very sensitive data such as encryption keys. This is particularly advisable where keys are stored in the same memory location for long periods of time and control access to large amounts of information, such as keys used for transparent encryption of files on disk drives. The bit-flipping also has the convenient side-effect of keeping the page containing the encryption keys at the top of the queue maintained by the system's paging mechanism, greatly reducing the chances of it being paged to disk at some point.